Talk to STACK about this product   Home > Motorsport > Products

Stack Sensors, Wiring, and Accessories

 

Instruments

Part No. Description Product Details Images (click to view)
Auxiliary Gauges, Installation Kit
ST584 INSTALL KIT, PROFESSIONAL TACHOMETER, FOR ST400/ST430/C  
ST913029 INSTALL KIT, CLUBMAN TACH, INCL. BRKT & HRDWRE, SWITCH, & CONNECTORS ST913029
ST913029
ST913031 RECALL SWITCH, HARNESS & BRACKET FOR, ST700 & ST500 ST913031
ST913031
Auxiliary Gauges, Lighting
ST269114 MODULE, DIMMING CONTROL, FOR 52MM GAUGES (UP TO 6) ST269114
Auxiliary Gauges, Sensor, Lambda
ST262243 SENSOR, WIDEBAND LAMBDA, FOR 52MM GAUGE ST262243
Auxiliary Gauges, Sensor, Pressure
ST262242 SENSOR, OIL PRESSURE, 100PSIG/7 BAR, 1/8" NPTF (M), FOR 52MM ELEC. GAUGE ST262242
ST262245 SENSOR, FLUID PRESSURE, 15PSIG/1 BAR, 1/8" NPTF (M), FOR 52MM PRO STEPPER GAUGE ST262245
ST262246 SENSOR, FLUID PRESSURE, 100PSIG/7 BAR, 1/8" NPTF (M), FOR 52MM PRO STEPPER GAUGE ST262246
ST262249 SENSOR, MAP, 3 BAR, REPLACEMENT, FOR 52MM PROF. STEPPER GAUGE ST262249
Auxiliary Gauges, Sensor, Speed
ST668 SPEED SENSOR, PROXIMITY FOR ST38XX SPEEDOMETERS  
Auxiliary Gauges, Sensor, Temperature
ST262252 SENSOR, TEMPERATURE, 300ºF/150ºC, 1/8" NPTF (M), FOR 52MM PRO STEPPER GAUGE ST262252
ST262256 SENSOR, TEMPERATURE, 300ºF/150ºC, M10 (M), FOR 52MM ELEC. GAUGE  
ST262258 SENSOR, TEMPERATURE, 300ºF/150ºC, 1/8" NPTF (M), FOR 52MM ELEC GAUGE ST262258
Auxiliary Gauges, Wiring
ST265233 WIRING HARNESS, FUEL LEVEL, FOR 52MM PRO STPR GAUGE ST265233
ST265297 WIRING HARNESS, FUEL LEVEL, FOR 52MM PRO-CONTROL GAUGE  
ST265232 WIRING HARNESS, WIDEBAND LAMBDA, 52MM GAUGE ST265232
ST265253 WIRING HARNESS, 7.6M LENGTH, WIDEBAND LAMBDA 52MM GAUGE ST265253
ST265227 WIRING HARNESS, PRESSURE, FOR 52MM PRO STEPPER GAUGE ST265227
ST265229 WIRING HARNESS, MAP/BOOST, FOR 52MM PRO STEPPER GAUGE  
ST265294 WIRING HARNESS, PRESSURE, FOR 52MM PRO-CONTROL GAUGE  
ST265296 WIRING HARNESS, VAC/BOOST, FOR 52MM PRO-CONTROL GAUGE  
ST594 WIRE HARNESS, PROFESSIONAL TACHOMETER, FOR ST400/ST430/C  
ST265226 WIRING HARNESS, TEMPERATURE, FOR 52MM PRO STEPPER GAUGE  
ST265251 WIRING HARNESS, EGT, FOR 52MM PRO STPR GAUGE, INCLUDES PROBE  
ST265295 WIRING HARNESS, TEMPERATURE, FOR 52MM PRO-CONTROL GAUGE  
ST265299 WIRING HARNESS, EGT, FOR 52MM PRO-CONTROL GAUGE, INCL. PROBE  
ST265234 WIRING HARNESS, VOLTMETER, FOR 52MM PRO STPR GAUGE ST265234
ST265298 WIRING HARNESS, VOLTMETER, FOR 52MM PRO-CONTROL GAUGE  
Dash Displays, Sensor, Pressure
ST742K FLUID PRESS. SENSOR & LEAD, RESISTIVE, 30 PSIG / 2 BAR, 1/8" NPTF (M)  
ST745K FLUID PRESS. SENSOR & LEAD, RESISTIVE, 150 PSIG / 10 BAR, 1/8" NPTF (M) ST745K
ST745
Dash Displays, Sensor, Temperature
ST760K FLUID TEMP SENSOR & LEAD, 300ºF / 150ºC, 1/8" BSPT (M)  
ST762K FLUID TEMP SENSOR & LEAD, 300ºF / 150ºC, M10 (M) ST762
ST764K FLUID TEMP SENSOR & LEAD, 300ºF / 150ºC, 1/8" NPTF (M) ST764K
ST764
ST764_v2
ST769 TEMP SENSOR, SOLID STATE, 300ºF / 150ºC, M6X1 (M)  
Dash Displays, Wire Harness
ST918040 RPM ADAPTER, ALLOWS USE OF ST670 (NOT INCLUDED) AS ENGINE RPM SENSOR  
ST918038 ROTARY CONTROL SWITCH AND HARNESS, FOR ST700 & ST500 ST918038
ST918038_v2
ST918039 WIRING HARNESS, MAIN, ST700 & ST500 ST918039
ST918049 SENSOR WIRING HARNESS FOR ST700, ALLOWS ADDITION OF TEMP & PRESS SENSORS This optional sensor adapter harness for Stack ST700 displays allows for connection of a combination of two analog pressure or temperature sensor inputs which can then be monitored in the LCD portion of the instrument display.  
ST872-006 WIRE HARNESS, FOR 2005+ MADE ST8100/8130/8120 This pre-terminated replacement wire loom is a direct plug and play replacement for Stack display models ST8100 and ST8130 built after 2004. For models ST8110SR please see ST872-806.
  • This product may also be used to replace the wiring loom on earler Stack ST8100 and ST8130 models manufactured prior to 2004. When doing so, please also purchase MSS to Spade adapters ST918037 to allow for proper connection of the resistive pressure sensors equipped on models from that era.
  
ST872-806 WIRE HARNESS, ST8110SR DISPLAY SYSTEM This pre-terminated replacement wire loom is a direct plug and play replacement for Stack display models ST8110SR. For models ST8100 and ST8130 please see ST872-006.  
ST910085-202 5V REGULATOR STUB FOR ST81XX DISPLAYS 2005 & NEWER This component plugs directly onto the 'REG' connector of your ST8100 series display wire loom and is responsible for controlling supplied power to your solid state pressure sensors making it an excellent spare to keep on the hauler for when the unexpected happens.
  • A blown or missing regulator is the #1 cause of reports of malfunctioning pressure channels on ST8100 displays.
 ST910085-202

 
MC Click to return to top of page

Data Acqusition

Part No. Description Product Details Images (click to view)
Connectors
ST163021 CONNECTOR, MIL-SPEC, 19 WAY, MALE, INCL. PINS FOR 18-24 AWG WIRE  
ST269382 CONNECTOR KIT, TYPE K THERMOCOUPLE, PLUG (MALE), QTY. 4 ST269382
ST581 CONNECTOR KIT, MINISURESEAL, PLUG (M), 5EA. ST581
ST582 CONNECTOR KIT, MINISURESEAL, RECEPTICAL (F), 5EA. ST582
Data Download Devices
ST269620 DATADRIVE, CAN2USB DEVICE (FOR DRAG RACING SYSTEMS ONLY) ST269620
ST8185 AR DASH DATA UPGRADE (NET. HARNESS, USB CABLE, DATAPRO SOFTWARE) The Dash Data Logging Upgrade Kit contains everything you need to download and view recorded data from a Stack ST8100 Action Replay dash within DataPro Analysis software. This optional display upgrade is an excellent way for beginning users to transition to more advanced data analysis techniqued and for more advanced to benefit from better comparative analytics for fine tuning their performance and setups between sessions.
  • Includes pre-terminated Stack ST877 Network harness with weather sealed download jack,ST8991 CAN-USB Data Download Device, and a copy of Stack DataPro analysis software.
  • When ordering this product please be prepared to provide your sales person with your system Serial number and Tag code. This information is located on the silver identification label on the rear of your display and will allow Stack to confirm your hardware supports the required features and to authorize the required unlock PIN code for DataPro software use with your system.
  
ST8991 CAN2USB DATA DOWNLOAD DEVICE (FOR CONFIG SYSTEMS RUNNING DATAPRO V5+) ST8991
Lap Timing
ST543 LAP TIMING RECEIVER, INFRARED This lap timing receiver simply plugs into the LAP connector on Stack display and logger wiring harnesses. When the vehicle passes the track side beacon the lap time 'pops up' in the graphic display with an accuracy of 1/100th of a second. At any time the driver can select the Lap Time Display layer to show the Last Lap Time, Best Lap Time and number of laps driven. ST543
ST544 LAP TIMING BEACON, TRACKSIDE, INFRARED ST544
ST546 LAP TIMING RECEIVER & BEACON KIT, INFRARED  
Sensor, GPS
ST998 GPS ANTENNA RECEIVER, 10HZ The Stack ST998 is a 10 Hz GPS antenna receiver for use with Stack Configurable Displays, Data Systems and Digital Video Recorders compatible with GPS NEMA data. Purchase this accessory for your Stack system to display and record information regarding vehicle speed, position, heading, altitude, date, time, and additional GPS data feed statistics. Excellent addition to systems employing wheel speed sensors for analysis of wheelspin and lock up, as well as marine, aerospace, and offroad applications where wheel speed is not available or is unsuitable for groundspeed and distance measurements. Record and analyze vehicle routes and plot track maps based on driven line. May also be used as a lap timing alternative to conventional beacon timing on model ST9918 displays.
  • Fast and reliable 10 Hz Signal Update Rate
  • Low profile, robust, waterproof antenna / receiver offers superior cold start satellite acquisition and retention, even in dense foliage environments making it perfect for use in racing environments.
  • LED Status indicator enables quick visual check of satellite fix
  • Integrated magnet for quick or temporary mounting on ferrous metal vehicle surfaces.
  • Baud Rate 38400
  • 3 Meter lead with pre-terminated Mini Sure Seal connecotr to plug directly into compatible Stack data systems
 ST998
Sensor, Lambda
ST269551 TWO CHANNEL LAMBDA CONTROLLER INTERFACE, REPLACEMENT MODULE FOR ST996 ST269551
ST269552 WIDEBAND LAMBDA SENSOR, REPACEMENT FOR ST994/ST996 ST269552
ST994 WIDEBAND LAMBDA SENSOR & 0-5V INTERFACE, 1 CHANNEL ST994
ST996 WIDEBAND LAMBDA SENSOR & 0-5V INTERFACE, 2 CHANNEL ST996
Sensor, Position
ST270072 LINEAR POTENTIOMETER, CLUB, 50MM/2" (E.G. SUSPENSION) Stack Clubman Linear Potentiometers provide excellent value for motorsport monitoring and measurement tasks offering sound repeatability, reliability, linearity and environmental performance. Featuring IP65 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, aerodynamic surface deflection, and actuator travel.
  • Active Electrical Travel: 50 mm (2.0 in.)
  • Retracted Mounting Distance: 178 mm (7 in.)
  • Anodised Aluminium Housing, IP65 Sealed.
  • Body Length: 139 mm (5.5 in.), Body Width: 13 mm (0.5 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 1,000 mm (39 in.)
  • Linearity: +/- 0.1%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -30 to +100 ºC (-22 to 212 ºF)
  • Maximum Operating Speed: 5m/s
  
ST270073 LINEAR POTENTIOMETER, CLUB, 100MM/4" (E.G. SUSPENSION) Stack Clubman Linear Potentiometers provide excellent value for motorsport monitoring and measurement tasks offering sound repeatability, reliability, linearity and environmental performance. Featuring IP65 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, aerodynamic surface deflection, and actuator travel.
  • Total Electrical Travel: 100 mm (4 in.)
  • Retracted Mounting Distance: 228 mm (9 in.)
  • Anodised Aluminium Housing, IP65 Sealed.
  • Body Length: 189 mm (7.4 in.), Body Width: 13 mm (0.5 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 1,000 mm (39 in.)
  • Linearity: +/- 0.1%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -30 to +100 ºC (-22 to 212 ºF)
  • Maximum Operating Speed: 5m/s
 XXXXX
ST270074 LINEAR POTENTIOMETER, CLUB, 200MM/8" (E.G. SUSPENSION) Stack Clubman Linear Potentiometers provide excellent value for motorsport monitoring and measurement tasks offering sound repeatability, reliability, linearity and environmental performance. Featuring IP65 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, aerodynamic surface deflection, and actuator travel.
  • Total Electrical Travel: 200 mm (8 in.)
  • Retracted Mounting Distance: 330 mm (13 in.)
  • Anodised Aluminium Housing, IP65 Sealed.
  • Body Length: 291 mm (11.5 in.), Body Width: 13 mm (0.5 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 1,000 mm (39 in.)
  • Linearity: +/- 0.05%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -30 to +100 ºC (-22 to 212 ºF)
  • Maximum Operating Speed: 5m/s
 ST270074
ST270077 LINEAR POTENTIOMETER, CLUB, 150MM/6" (E.G. SUSPENSION) Stack Clubman Linear Potentiometers provide excellent value for motorsport monitoring and measurement tasks offering sound repeatability, reliability, linearity and environmental performance. Featuring IP65 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, aerodynamic surface deflection, and actuator travel.
  • Total Electrical Travel: 150 mm (6 in.)
  • Retracted Mounting Distance: 278 mm (11 in.)
  • Anodised Aluminium Housing, IP65 Sealed.
  • Body Length: 239 mm (9.4 in.), Body Width: 13 mm (0.5 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 1,000 mm (39 in.)
  • Linearity: +/- 0.05%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -30 to +100 ºC (-22 to 212 ºF)
  • Maximum Operating Speed: 5m/s
 ST270077
ST972 LINEAR POTENTIOMETER, PROFESSIONAL, 50MM/2" (E.G. SUSPENSION) Stack Professional Linear Potentiometers are engineered to excel in the most demanding conditions in motorsport offering excellent repeatability, reliability, linearity and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel.
  • Active Electrical Travel: 50 mm (2.0 in.)
  • Retracted Mounting Distance: 198 mm (7.8 in.)
  • Anodised Aluminium Housing, IP67 Sealed.
  • Body Length: 157.5 mm (6.2 in.), Body Width: 15 mm (0.6 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 585mm (23 in.)
  • Linearity: +/- 0.2%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -40 to +150 ºC (-40 to 300 ºF) and short term to 175 ºC (347 ºF)
  • Maximum Operating Speed: 10m/s
  
ST973 LINEAR POTENTIOMETER, PROFESSIONAL, 100MM/4" (E.G. SUSPENSION) Stack Professional Linear Potentiometers are engineered to excel in the most demanding conditions in motorsport offering excellent repeatability, reliability, linearity and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel.
  • Total Electrical Travel: 100 mm (4 in.)
  • Retracted Mounting Distance: 248 mm (9.8 in.)
  • Anodised Aluminium Housing, IP67 Sealed.
  • Body Length: 207.5 mm (8.2 in.), Body Width: 15 mm (0.6 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 585mm (23 in.)
  • Linearity: +/- 0.1%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -40 to +150 ºC (-40 to 300 ºF) and short term to 175 ºC (347 ºF)
  • Maximum Operating Speed: 10m/s
 ST973
ST974 LINEAR POTENTIOMETER, PROFESSIONAL, 200MM/8" (E.G. SUSPENSION) Stack Professional Linear Potentiometers are engineered to excel in the most demanding conditions in motorsport offering excellent repeatability, reliability, linearity and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel.
  • Total Electrical Travel: 200 mm (8 in.)
  • Retracted Mounting Distance: 351 mm (13.8 in.)
  • Anodised Aluminium Housing, IP67 Sealed.
  • Body Length: 310.5 mm (12.2 in.), Body Width: 15 mm (0.6 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 585mm (23 in.)
  • Linearity: +/- 0.1%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -40 to +150 ºC (-40 to 300 ºF) and short term to 175 ºC (347 ºF)
  • Maximum Operating Speed: 10m/s
 ST974
ST976 STRING POTENTIOMETER, 300MM/12" (0-5V OUTPUT) ST976
ST977 LINEAR POTENTIOMETER, PROFESSIONAL, 150MM/6" (E.G. SUSPENSION) Stack Professional Linear Potentiometers are engineered to excel in the most demanding conditions in motorsport offering excellent repeatability, reliability, linearity and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 50-200 mm (2-8 in.), these position sensors are pre-terminated for use with Stack data systems monitoring parameters such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel.
  • Total Electrical Travel: 150 mm (6 in.)
  • Retracted Mounting Distance: 298 mm (11.7 in.)
  • Anodised Aluminium Housing, IP67 Sealed.
  • Body Length: 257.5 mm (10.1 in.), Body Width: 15 mm (0.6 in.)
  • Spherical Bearing Mounting Hole Size: 5 mm (0.197 in.)
  • Pre-terminated cable with Mini Sure Seal Connector. Length: 585mm (23 in.)
  • Linearity: +/- 0.1%
  • Life: Greater than 25 million cycles
  • Operating Temperature: -40 to +150 ºC (-40 to 300 ºF) and short term to 175 ºC (347 ºF)
  • Maximum Operating Speed: 10m/s
 ST977
ST978 ROTARY POTENTIOMETER 360DEG (E.G.STEERING) ST978
ST979 ROTARY POTENTIOMETER SENSOR 120DEG (E.G. PEDAL ANGLE) ST979
Sensor, Pressure
ST269535 FLUID PRESSURE SENSOR, SOLID STATE, 1 BAR / 15 PSIG, 1/8" NPTF (M) ST269535
ST269536 FLUID PRESSURE SENSOR, SOLID STATE, 6.9 BAR / 100 PSIG, 1/8" NPTF (M) ST269536
ST269537 FLUID PRESSURE SENSOR, SOLID STATE, 17 BAR / 250 PSIG, 1/8" NPTF (M) ST269537
ST269538 FLUID PRESSURE SENSOR, SOLID STATE, 34 BAR / 500 PSIG, 1/8" NPTF (M) ST269538
ST269539 FLUID PRESSURE SENSOR, SOLID STATE, 110 BAR / 1600 PSIG, 1/8" NPTF (M) ST269539
ST269540 FLUID PRESSURE SENSOR, SOLID STATE, 206 BAR / 3000 PSIG, 1/8" NPTF (M) ST269540
ST269546 DIFFERENTIAL PRESSURE SENSOR, 0-1,000 MBAR, (VACUUM SENSOR 30IN HG) ST269546
ST269559 FLUID PRESSURE SENSOR, SOLID STATE, 4 BAR / 60 PSIG, 1/8" NPTF (M)  
ST269567 FLUID PRESSURE SENSOR, SOLID STATE, 2 BAR / 30 PSIG, 1/8" NPTF (M) ST269567
ST453 BOOST SENSOR W/ LO-FREQ DSP, ABSOLUTE 0-50PSI/3.5BAR, 1/8" NPT MALE  
ST740 BOOST PRESS SENSOR, SOLID STATE, 50PSIA / 3.5 BAR, 1/8" NPTF (M) ST740
ST747 FLUID PRESS. SENSOR, SOLID STATE, 150 PSIG / 10 BAR,1/8" NPTF (M) ST747
ST747
ST749 FLUID PRESS SENSOR, SOLID STATE, 100 BAR / 1500 PSIG1/8" NPTF (M) ST747
Sensor, Speed
ST269362 MAGNET KIT, (QTY. 2 RARE EARTH MAGNETS FOR RPM SENSOR) ST269362
ST269387 DRIVESHAFT COLLAR, ALUMINUM, 4 MAGNET, 1.875" (47.6MM) ID ST269387
ST269388 DRIVESHAFT COLLAR, 4 MAGNET, 2.187" (55.5MM) ID ST269388
ST269389 DRIVESHAFT COLLAR, 4 MAGNET, UNIVERSAL (MACHINE TO FIT) ST269389
ST269510 RPM SENSOR, MAGNETIC, 3/8"-24 X 0.625 IN., INCL. 2 MAGNETS ST269510
ST269511 DRIVESHAFT RPM SENSOR KIT, 47.6MM / 1.875" ST269511
ST269512 DRIVESHAFT RPM SENSOR KIT, 55.5MM / 2.187" ST269512
ST269513 DRIVESHAFT RPM SENSOR KIT, UNIVERSAL (MACHINE TO FIT) ST269513
ST269514 RPM SENSOR, MAGNETIC, 5/16"-24 X1.5, INCL. MAGNET ST269514
ST269515 WHEEL SPEED SENSOR, MAGNETIC, 3/8"-24 X1.5, INCL. 2 MAGNETS ST269515
ST269531 RPM SENSOR, MAGNETIC, 5/16"-24 X1.5 ST269531
ST269532 RPM SENSOR, MAGNETIC, 3/8"-24 X1.5 ST269532
ST269533 RPM SENSOR, MAGNETIC, 3/8"-24 X0.620 ST269533
ST269581 MOUNTING BRACKET FOR DRIVESHAFT SENSOR ST269581
ST269589 GPS GROUND SPEED KIT, 10HZ, FREQUENCY OUTPUT, INCL. MODULE & ANTENNA This GPS antenna and module assembly converts GPS vehicle ground speed data into a digital frequency output suitable for connection to Stack display and data system inputs for monitoring a pulse type speed signal. Plug and Play with Stack ST81xx series speed inputs out of the box. Excellent solution for vehicles where conventional speed sensors are not available or for use on data systems seeking a reliable ground speed reference. Configurable frequency output for quick setup and calibration to your existing system parameters.  
ST492 WHEEL SPEED PULSE AMPLIFIER ST492
ST493 RPM COIL CONNECTION INTERFACE - FOR MFD / MFR ST493
ST670 SPEED SENSOR, PROXIMITY ST670
ST670_v2
ST670_v3
Sensor, Temperature
ST269329 THERMOCOUPLE, TYPE K, ARMORED TIP, EGT, 90º, 5MM DIA, 76MM PROBE LENGTH, 3M LEAD ST269329
ST269384 THERMOCOUPLE, TYPE K, EXPOSED TIP, EGT, 90º, 5MM DIA, 76MM PROBE LENGTH, 3M LEAD ST269384
ST269516 EXHAUST GAS TEMPERATURE TWO SENSOR KIT, EXPOSED TIP THERMOCOUPLE ST269516
ST269519 AIR INLET TEMPERATURE SENSOR KIT, EXPOSED TIP THERMOCOUPLE ST269519
ST269520 CYLINDER HEAD TEMPERATURE SPARK PLUG SENSOR KIT, THERMOCOUPLE ST269520
ST269547 FLUID TEMPERATURE SENSOR, O-5V, 150ºC / 300ºF, 1/8" NPTF (M) ST269547
ST269554 THERMOCOUPLE, TYPE K, CYLINDER HEAD TEMP SPARK PLUG SENSOR, REPLACEMENT ST269554
ST657 THERMOCOUPLE AMPLIFIER, TYPE K, 0ºC TO +200ºC, 0-5V OUTPUT, MINISURESEAL ST657
ST658 THERMOCOUPLE AMPLIFIER, TYPE K, 0ºC TO +1100ºC, 0-5V OUTPUT, MINISURESEAL ST658
ST991 TEMPERATURE SENSOR, SOLID STATE, 300ºF / 150ºC, M6X1 MALE ST991
ST991_v2
Wiring
ST269527 WIRING HARNESS, EXTENSION, MINISURESEAL, 2.4M / 8FT.  
ST269528 WIRING HARNESS, EXTENSION, MINISURESEAL, 3.0M / 10 FT  
ST269582 SENSOR HARNESS ADAPTOR, WEATHERPAK TO MOLEX  
ST269583 SENSOR HARNESS ADAPTOR, MSS TO MOLEX ST269583
ST269583_2
ST570001 WIRE HARNESS, SYSTEM, PRO LCD MOTORSPORT DISPLAY LOGGER ST570001
ST570002 WIRE HARNESS, SENSOR EXPANSION, 4 CH., PRO LCD MOTORSPORT DISPLAY LOGGER ST570002
ST570003 WIRE HARNESS, EXTENSION, DTM, 6 WAY, 2M  
ST872-925 WIRE HARNESS, MFD (MULTI-FUNCTION DISPLAY) This pre-terminated replacement wire loom is a direct plug and play replacement for Stack configurable Multi-Function Displays with part numbers starting ST89xx. ST872-925
ST872-935 WIRE HARNESS, MFD (MULTI-FUNCTION DISPLAY), STRAIGHT BOOT This pre-terminated replacement wire loom is a direct plug and play replacement for Stack configurable Multi-Function Displays with part numbers starting ST89xx. This optional variant design replaces the 90 degree boot on the display connector with a straight boot helpful for addressing clearance issues as well as allowing for a more direct run to the engine bay on left hand drive vehicles.  
ST875-202 SENSOR INTERFACE HARNESS FOR MF & MFR ST875-202
ST875-402 2ND SENSOR INTERFACE HARNESS FOR MF2 & MFR2 ST875-402
ST877 NETWORK HARNESS, DVL TO STACK DASH DISPLAY / LOGGING SYSTEM USB_Dongle_Harness
ST877
ST884 EXTENDER HARNESS KIT, (2X0.7M, 2X1.4M, 1X2.1M) This kit includes a combination of the most utilized pre-terminated extension leads employed when installing Stack data systems and displays on a variety of applications making it the perfect accessory to purchase alongside your new Stack system prior to installation or as a set of spares to keep on the hauler for when the unexpected happens.
  • Shielded four conductor Mini Sure Seal terminated extension leads suitable for use on Stack data and display system sensor inputs or network connections
  • Includes the following cables - Quantity 2 of 0.7 M (2.3 ft.) length, Quantity 2 of 1.4 M (4.6 ft.) length, and Quantity 1 of 2.1 M ( 6.8 ft.) length
 ST884
ST888 NETWORK EXTENSION HARNESS 1.5M (UNTERMINATED)  
ST889 NETWORK EXPANSION HARNESS (TERMINATED), DISPLAY, DVL, 3 MODULES  
ST900159 WIRE HARNESS, MFRT  
ST918009 ADAPTER HARNESS, 1.4M / 4.6FT., SPADE TERMINAL TO MSS ST918009
ST918020 WIRING HARNESS, EXTENSION, MINISURESEAL, 0.7M / 2.3FT. ST918020
ST918021 WIRING HARNESS, EXTENSION, MINISURESEAL, 1.4M / 4.6FT. ST918021
ST918022 WIRING HARNESS, EXTENSION, MINISURESEAL, 2.1M / 6.9FT. ST918022
ST918024 RPM EXTENSION HARNESS, MSS TO SPADE TERMINAL, 0.2M / 0.6FT. ST918024
ST918037 ADAPTER HARNESS, SPADE TERMINAL TO MSS, 0.4M / 1.3FT. ST918037
ST918078 OPTION POWER LEAD, NETWORK HARNESS  
ST918081 WIRE HARNESS, SHIFT LIGHT ADAPTER, SPADE TERMINAL TO MSS This optional shift light adapter harness may be used to connect Stack single stage panel or dash top alarm lamps to the Shift Light output of Stack Multi-Function Display, Recorder, and Expansion modules. ST918081
ST918083 CAN ECU INTERFACE ADAPTOR HARNESS FOR MFD / MFR / MF This optional ECU adapter harness for Stack Multi-Function Displays and Recorders plugs directly into the A5 and A6 inputs to allow you to start monitoring and recording CANbus data from supported aftermarket engine management systems. ST918083
ST918100 CAN TERMINATOR MSS, STACK NETWORK  
ST918128 WIRE HARNESS, MFD/MFR GPS INTERFACE This optional GPS adapter harness for Stack Multi-Function Displays and Recorders allows you to plug our ST998 GPS antenna directly into the A8 input to start monitoring and logging vehicle position and speed data.  
ST995009 SENSOR HARNESS ADAPTOR, WEATHERPAK TO MSS ST995009
Fittings and Adapters
ST154003 ADAPTER, 1/8" NPTF FEMALE TO M10 MALE ST154003
ST154006 ADAPTER, 1/8" NPTF FEMALE TO 1/8" BSPT MALE ST154006
ST154012 ADAPTER, M6X1 FEMALE TO M10X1 MALE  
ST154013 ADAPTER, M6X1 FEMALE TO 1/8" NPTF MALE ST154013
ST154016 ADAPTER, 1/8" BSPT FEMALE TO 1/8" NPTF MALE  
ST262277 ADAPTER, 1/8" NPTF (F) TO M12 (M) ST262277
ST269385 COMPRESSION FTG, STAINLESS, EGT, 1/8" NPTF (M), FOR 5MM DIA TYPE K THERMOCOUPLE ST269385
ST269386 WELD FITTING, STEEL, EXHAUST GAS TEMP, 1/8" NPTF (F) ST269386
ST269553 WELD FITTING, STAINLESS STEEL, FOR WIDEBAND LAMBDA SENSOR ST269553
Switches
ST510 2 SWITCH KIT, WITH CONNECTORS ST510
ST511 3 SWITCH KIT, WITH CONNECTORS  
ST514 4 SWITCH KIT, W/O CONNECTORS ST514
ST517 1 SWITCH KIT  
Alarm Lamps
ST269580 SHIFT LIGHT, DASH TOP, RED, 5 LED, SINGLE STAGE, ADJUSTABLE BRIGHTNESS ST269580
ST532 WARNING LIGHT, DASH TOP, AMBER ST532
ST533 WARNING LIGHT, DASH TOP, WHITE ST533
ST534 WARNING LIGHT, DASH TOP, RED ST534
ST536 WARNING LIGHT, PANEL MOUNT, WHITE
  • Outer diameter of lamp bezel - 14.7mm (0.579 in)
  • Stands 9.1mm (0.358 in) proud of mounting surface.
  • Recommended for panels up to a thickness of 9.6mm (0.378 in)
  • Allow a minimum clearance to other surfaces behind the panel of 50mm (2 in.) for wiring and installation purposes.
  • Suitable for operation on 12V and 16V systems. 100mA draw when illuminated.
 ST536
ST537 WARNING LIGHT, PANEL MOUNT, RED
  • Outer diameter of lamp bezel - 14.7mm (0.579 in)
  • Stands 9.1mm (0.358 in) proud of mounting surface.
  • Recommended for panels up to a thickness of 9.6mm (0.378 in)
  • Allow a minimum clearance to other surfaces behind the panel of 50mm (2 in.) for wiring and installation purposes.
  • Suitable for operation on 12V and 16V systems. 100mA draw when illuminated.
 ST537
ST538 WARNING LIGHT, PANEL MOUNT, AMBER
  • Outer diameter of lamp bezel - 14.7mm (0.579 in)
  • Stands 9.1mm (0.358 in) proud of mounting surface.
  • Recommended for panels up to a thickness of 9.6mm (0.378 in)
  • Allow a minimum clearance to other surfaces behind the panel of 50mm (2 in.) for wiring and installation purposes.
  • Suitable for operation on 12V and 16V systems. 100mA draw when illuminated.
 ST538
ST539 SHIFT LIGHT ARRAY, SEQUENTIAL, 5-STAGE Optimising gear shifts is one of the most effective means of reducing lap times and these easy to fit options from Stack complement the ST81xx and configurable instrument displays in helping the driver achieve perfect shifts.
  • 5 stage sequential shift light - 3 amber, 1 red, 1 blue LED indicators
  • Black anodized billet aluminium housing
  • IP67 sealed
  • Two M3x0.6mm mounting provisions on the base of the assembly
  • Compatible with STACK Street, Race, MFD/MFDL, and MFR products
 ST539
ST539_2
ST539_3
ST539_4
ST539_5

Where to buy Stack

 
Back one page | Aux. Gauges Mounting Solutions | Pro-Control Gauges | Motorsport Home
go UP

Stack is a leading supplier of solutions for Data Logging in Motorsport with over 30 years of proven experience and service.

Applications including data loggers, lap timers, dash displays, tachometers, instruments and gauges, analysis software, and unique harsh environment Data Logging products for all forms of motorsport.
 
         
  Products Support Where to buy Stack Information
Stack Ltd.
Copyright © Stack Ltd. All rights reserved. Auto Meter Privacy Policy