"VS" Module - Video Overlay, Data Synchronization and Sensor Interface
 

 

Note: Multi-Function Recorder (MFR)

The products on this page were released before the introduction of Stack's Multi-Function Recorder, a single box data recording solution. There may be applications when a modular approach is still the better way forward. Please contact us for assistance in finding the best solution for your application.

 


 

 

Bringing flexibility and expandability to Data Logging Systems...

 

VS Module

 

 
 

The VS Module facilitates the use of video input and data synchronization to a recording device and for subsequent analysis when the data is downloaded to a PC running DataPro with Synchronized Video.

The "VS" Module connects between a remote mounted camera and a digital video recorder, such as the Stack harsh environment DVR.

Any channel that is monitored by the Stack systems can be overlaid into the video picture in real-time. The channel can be formatted with a text label and with the channel units displayed if required.

The "VS" Module can be used in a "stand-alone" configuration, or as part of a larger system.

In addition the "VS" Module features an intelligent alarm capability so that whenever any monitored parameter exceeds a threshold level, a plain text warning message is popped up on the recorded video screen.

The "VS" Module provides control switch inputs for manually starting & stopping data logging and for adding Event Markers to the data.

In addition this module has direct sensor inputs for 5 low resolution voltage inputs, a dedicated RPM signal input and 2 pulse inputs.

 
 
Specifications

Input Type
(8 Total Available)

Min. Sample
Freq.

Max. Sample
Freq.

Resolution

Max. Input
Voltage

Input
Impedance

Excitation
Current

Other Technical Data

0-5 Volts
0-25 Volts
0-333 Ohms

1Hz
1Hz
1Hz

50Hz
50Hz
50Hz

10 bit
10 bit
10 bit

20V
50V
20V

>1MΩ
10kΩ
n/a

n/a
n/a
15mA

Direct Connection
Direct Connection
Direct Connection

Stack DSP signal
10mV
50mV
100mV
500mV
1V
5V
20V
Differential Interface
K Type Thermocouple
Interfaces

1Hz

50Hz

9 - 15 bit

n/a

n/a

n/a

Resolution dependent on sampling frequency
<5Hz = 15bit......200Hz = 9bit

0-40Khz Pulse

1Hz

50Hz

16 bit

20V

n/a

15mA

Min. Pulse width 5s.
Threshold 10mA 0.5mA (e.g. open collector)

 

Sensor Excitation Provided by Module

V batt - 200mA max. total load

Regulated 5 Volt - 200mA max. total load


Environmental Spec.

Technical Notes

Vibration:

20g, 50-2000Hz, 12hr on each of 3 axis.

Operating Temperature:

-40C (-40F) to +85C (+185F)

Humidity:

0-100%

Sealing:

IP67

Power:

8Volts to 16Volts DC at 250mA operational. +/-80Volts protected.

 
 
 
Frequently Asked Questions
Further information can be found in our Troubleshooting Knowledgebase and FAQ sections.

Your Stack dealer will be happy to assist you further.

 
Click
If available
If available
 


Stack Modules - Box Clever

Back one page | | Test & Engineering Home
go UP

Mobile, rugged, and harsh environment test solutions - Stack modular, Data Logging systems.

Stack is a leading supplier of high quality instruments, displays, Data Logging, and video-logging systems to motorsport and harsh environment test solutions with over 25 years of proven experience and service.

  Email: sales@stackltd.com
         
         
  Products Support Where to buy Stack Information
Stack Ltd.



 

 

   
Terms & Conditions | Privacy Policy
Copyright 2013 Stack Limited
Stack is a world-leading supplier of instruments, Data Logging, TPMS & ruggedised video-logging systems to motorsport, automotive & industrial customers worldwide.
Registered in England & Wales.
No. 6292480
  If you use email or spam filter rules, please add sales@stackltd.com  to your Address Book or Safe List.