We offer a comprehensive range of sensors to complement our Data Logging systems...
 

 

 
Key Features    
 

Stack provide a wide range of sensors and specialist interfaces to meet the vast majority of test and engineering requirements. We only offer sensors that have passed our rigorous testing program, and have proven suitable for test and engineering applications.

Details of our main sensor types have been listed below:

 


Solid-state 0-5 Volt Output Sensors
These sensors typically offer 1% accuracy - over their whole operating range - and are ideal for monitoring chassis and engine parameters where Digital Signal Processing is not required.

The range of sensors includes:



Digital Sensors and Interfaces

We manufacture our own range of high precision digital sensors and amplifiers incorporating Digital Signal Processing (DSP) within the sensor.

Used in conjunction with the ST8900 systems these sensors offer unrivalled performance, with up to 15 bit resolution (0.003%) and <0.5% total error over the whole operating range of the sensor.

Furthermore these devices also enable high frequency signals -e.g. 1-2kHz - to be recorded at any sampling frequency down to 1Hz without risk of aliasing errors, and can greatly increase the recording time of the data logging system.

The range of sensors and amplifiers includes:



Resistive Sensors

We also supply a range of automotive spec. pressure, temperature and rotary displacement sensors suitable for measuring basic engine condition and driver inputs.

The range of sensors includes:

 
 
Specifications
Lap Timing System 
ST544
ST543
Infrared Lap Timing System receiver only
ST544
Infrared Lap Timing System trackside beacon only
ST546
Infrared Lap Timing System receiver & beacon
 
Temperature Sensors 
ST767/ST658/ST659
ST761
ST657
1 channel K-Type Thermocouple Interface 0-200°C 0-5V
ST658
1 channel K-Type Thermocouple Interface 0-1100°C 0-5V
ST764*
300 ºF Fluid Temp. Sensor (1/8 NPTF)
 
Pressure Sensors 
ST453
ST453
0-3.5 Bar Absolute Pressure Sensor with Low Freq DSP Interface (1.5% FS Total Error Band over -20C to +80C) 1/8NPT Pressure Fitting (e.g. Boost)
 
ST740
0 to 3.5 bar/ 50 psi boost sensor (1/8"NPTF) (replacement only)
ST742*
0-30 psi Fluid Pressure Sensor(1/8 NPTF)
ST745*
0-150 psi Fluid Pres. Sensor (1/8 NPTF)
ST747-1/8NPTF
10 bar/ 150 psi pressure sensor (1/8 NPTF)
ST749
ST749
Brake pressure sensor (1/8 NPTF)
 
Pulse Sensors
 
ST492
Pulse Amplifier (e.g. Gearbox Sensor Amplifier)
ST670
ST670
Proximity Speed Sensor
 
Displacement Sensors 

ST972
ST973
ST974
ST977

ST972
Linear Potentiometer 50mm/2" (e.g. Suspension)
ST973
Linear Potentiometer 100mm/4" (e.g. Suspension)
ST974
Linear Potentiometer 150mm/6" (e.g. Suspension)
ST977
Linear Potentiometer 200mm/8" (e.g. Suspension)
 
ST976
300mm/20" String Potentiometer (0-5V output)
 
ST978
ST978
Rotary Potentiometer 360Deg (e.g.Steering)
ST779
ST979
Rotary Potentiometer Sensor 120Deg (e.g. pedal angle)
Miscellaneous Sensors 
ST769
-20 to 150 deg C temperature sensor (M6x1)

Note: the sensors above include products from the Stack Motorsport range as well as Test & Engineering

Replacement sensors for our 52mm Motorsport gauges are available here.

 
 
 
Frequently Asked Questions
Further information can be found in our Troubleshooting Knowledgebase section.

Your Stack dealer will be happy to assist you further.

 
Click
If available
If available
 


Back one page | | Test & Engineering Home
go UP

Mobile, rugged, and harsh environment test solutions - Stack modular, Data Logging systems.

Stack is a leading supplier of high quality instruments, displays, Data Logging, and video-logging systems to motorsport and harsh environment test solutions with over 25 years of proven experience and service.

  Email: sales@stackltd.com
         
         
  Products Support Where to buy Stack Information
Stack Ltd.



 

 

Copyright © Stack Ltd. All rights reserved. Auto Meter Privacy Policy