Stack Colour LCD Motorsport Display
The next evolution of driver communication and data acquisition.
The Stack Colour LCD Motorsport Display is the next evolution of driver communication and data acquisition.
The carbon composite housing is IP65 sealed against water and dust intrusion and will easily withstand 20 g of continuous vibration and 50 g of shock.
Our 7" LCD panel ensures easy visibility under all circumstances with unmatched brightness and an optically bonded lens for extreme glare suppression.
The display layout is configurable to your individual specifications.
The system will accommodate two programmable data bus channels (I CAN and I serial) in conjunction with discrete analog sensors and its integrated 3 Axis Accelerometer.
Data collection can occur at up to 1,000 Hz and the internal memory allows for appropriate recording time.
User definable warnings take advantage of super bright, multicolour LEDs placed around the perimeter of the chassis to alert the driver to critical on-screen information.
|
|
|
Firmware Upgrade
Download Here
|
Display
- 7.0"TFT LCD panel
- Display Brightness: 1000 nit
- Resolution: 800 x 480
- Onboard photo sensors for automatic brightness control.
- 16 User configurable multi-colour LED's
- Display features perfectly rendered virtual analog needles, value display bands, digital value indicators for vehicle parameters and configurable full color text warning messages.
- 10 layers / screens / pages selected from user configurable templates (screens/instrument cluster designs/layouts), additional configurability supporting team selected graphics, parameter / instrument type and location, and size will be made available with future firmware and PC software releases.
Electrical
- Supply Voltage: 8-18VDC
- Typical Power Consumption: 800 mA
- Single 37 way AS connector.
- Mating Connector: Deutsch Autosport AS614-35SN
Inputs/Outputs
- 12 Configurable user sensor inputs
- 4 Configurable for Pulse, 0-5v, or resistive (0-526 Ω)
- 8 Configurable for 0-5V
- Internal 3-axis accelerometer +/-8g
- Internal battery voltage
- 1 Dedicated Laptrigger Switch Input
- 4 Integrated Control Switches
- 4 Configurable I/O
- Control Switches
- Pro Control Outputs - Drive external outputs for warning lights, relay control, etc.
- GPS Input (RS-232) - Mapping, Laptiming, etc.
Communications
- 2 Configurable CAN ports - Up to 1 Mb/s (customer electronics package integration)
- 1 Configurable RS232 port: GPS
- 1 Ethernet port: (Configuration, Data Exchange, Firmware Upgrades)
- 1 USB port: (Data exchange, configuration, Copy and upload, firmware upgrades)
Mechanical
- Weight: 700g
- Dimensions - 211mm Wide x 132mm High x 35mm Deep (excluding connector)
- Carbon Composite Housing
Data Logging
- Max number of channels: 128
- Max sample 1,000 Hz
- Max total samples per second: 8,000
- Internal Memory: 4GB solid state internal
- Supplied with DataPro Analysis software
- Data Security: Pin code prevents data review by unauthorized personnel
Environmental
- IP65 sealed
- Operating temperature range: -7°C to +80°C
- Humidity: 0-100% RH
- Continuous vibration up to 20g, Shock up to 50g
|
|
Professional Colour LCD Motorsport Display Logger
| ST9918 |
Pro 7" LCD Colour Motorsport Display Logger, w/ Starter Harness (IP65) |
Force / Acceleration Sensors (0-5V), Analogue
| ST791 |
+/- 5g Accelerometer with 5Hz 5-pole Butterworth Low-pass Filter |
System Expansion
Multi-Function Sensor Input Expansion Modules
| ST9933 |
10 Input MF Pro Expansion Kit. (Incl. Module, sensor harness) |
| ST9934 |
20 Input MF2 Pro Expansion Kit. (Incl. Module, 2 sensor harnesses) |
| ST269612 |
EGT A, 4 Ch, K-Type Thermocouple Module, 0ºC to 1,100ºC |
| ST269613 |
EGT B, 4 Ch, K-Type Thermocouple Module, 0ºC to 1,100ºC |
Sensors for Configurable Data Acquisition Systems
Lap Timing
| ST998 |
10Hz GPS Antenna Receiver (Speed, Mapping, Lap Timing) |
| ST543 |
Infrared Lap Timing System receiver only |
| ST544 |
Infrared Lap Timing System trackside beacon only |
| ST546 |
Infrared Lap Timing System receiver & beacon |
Temperature Sensors (0-5V), Analogue
| ST657 |
0C to +200C K-Type Thermocouple Interface with 0-5V output |
| ST658 |
0C to +1100C K-Type Thermocouple Interface with 0-5V output |
| ST991 |
20 to 150 deg C Fluid Temperature Sensor (M6x1) |
| ST269547 |
Fluid Temperature Sensor, 150C / 300F (1/8 NPTF Male) |
| ST269516 |
Exhaust Gas Temperature Two Sensor Kit, Exposed Tip Thermocouple |
| ST269517 |
Exhaust Gas Temperature Eight Sensor Kit, Exposed Tip Thermocouple |
| ST269518 |
Exhaust Gas Temperature Eight Sensor Kit, Armored Tip Thermocouple |
| ST269519 |
Air Inlet Temperature Sensor, Thermocouple |
| ST269520 |
Cylinder Head Temperature Sensor, Thermocouple |
Sensor Fittings
| ST154003 |
1/8NPTF to M10 adaptor |
| ST154006 |
1/8NPTF to 1/8BSPT adaptor |
| ST154012 |
M6x1 to M10x1 adaptor |
| ST154013 |
M6x1 to 1/8NPTF adaptor |
| ST269385 |
Compression Fitting, Exhaust Gas Temperature |
| ST269386 |
1/8" NPT Weld Fitting, Exhaust Gas Temperature |
| ST269553 |
Weld Fitting, Wideband Lambda Sensor |
Accessories, Wiring and Spares for Data Acquisition Systems
Display Options
| ST570002 |
Wire Harness, Sensor Expansion, 4 Ch., Pro LCD Motorsport Display Logger |
| ST570003 |
Wire Harness, DTM 6 PIN extension, 2m |
| ST884 |
Extender harness Kit (2x0.7m;2x1.4m;1x2.1m) |
| ST918020 |
Sensor Extension Harness - 0.7m |
| ST918021 |
Sensor Extension Harness - 1.4m |
| ST918022 |
Sensor Extension Harness - 2.1m |
| ST269527 |
Sensor Extension Harness - 2.4m / 8 ft |
| ST269528 |
Sensor Extension Harness - 3.0m / 10 ft |
| ST918040 |
Adaptor Harness - ST670 to RPM (ST670 not included) |
| ST581 |
5 off SureSeal Plug (Male) Kit |
| ST582 |
5 off SureSeal Receptical (Female) Kit |
| ST510 |
2 Switch kit |
| ST511 |
3 Switch kit |
| ST514 |
4 Switch kit |
Spares
| ST570001 |
Wire Harness, System, Pro LCD Motorsport Display Logger |
| ST269551 |
Two Channel Lambda Controller Interface, Replacement Module for ST996 |
| ST269554 |
Type K Thermocouple, Cylinder Head, Spark Plug Probe |
| ST269362 |
Magnet Kit, (qty. 2 rare earth magnets for RPM Sensor) |
| ST269329 |
Replacement Closed Tip Type K Thermocouple, Exhaust Gas Temperature, Right Angle |
| ST269382 |
Type K Thermocouple Connectors (Set of 4) |
| ST269384 |
Replacement Open Tip Type K Thermocouple, Exhaust Gas Temperature, Right Angle |
| ST269387 |
Driveshaft Collar, 4 Magnet, 1.875" (47.6mm) ID |
| ST269388 |
Driveshaft Collar, 4 Magnet, 2.187" (55.5mm) ID |
| ST269389 |
Driveshaft Collar, 4 Magnet, Universal (machine to fit) |
| ST269552 |
Replacement Wide Band Lambda Sensor for ST994/ST996 |
| ST269581 |
Mounting Bracket for Driveshaft Sensor |
Pressure Sensors (0-5V), Analogue
| ST269546 |
Vacuum Sensor, 30 inHg |
| ST453 |
0-3.5 Bar Absolute Pressure Sensor with Low Freq DSP Interface (1.5% FS Total Error Band over -20C to +80C) 1/8NPT Pressure Fitting (e.g. Boost) |
| ST740 |
0 to 3.5 bar/ 50 psi boost sensor (1/8 NPTF) |
| ST269535 |
1 bar / 15 psi pressure sensor, solid state (1/8 NPTF) |
| ST269567 |
2 bar / 30 psi pressure sensor, solid state (1/8 NPTF) |
| ST269559 |
4 bar / 60 psi pressure sensor, solid state (1/8 NPTF) |
| ST269536 |
6.9 bar / 100 psi pressure sensor, solid state (1/8 NPTF) |
| ST747 |
10 bar / 150 psi pressure sensor, solid state (1/8 NPTF) |
| ST269537 |
17 bar / 250 psi pressure sensor, solid state (1/8 NPTF) |
| ST269538 |
34 bar / 500 psi pressure sensor, solid state (1/8 NPTF) |
| ST749 |
100 bar / 1500 PSI pressure sensor, solid state (1/8 NPTF) |
| ST269539 |
110 bar / 1600 psi pressure sensor, solid state (1/8 NPTF) |
| ST269540 |
206 bar / 3000 psi pressure sensor, solid state (1/8 NPTF) |
Lambda Sensors
| ST994 |
Wideband Lambda Sensor & Interface 0-5V, 1 Channel |
| ST996 |
Wideband Lambda Sensor & Interface 0-5V, 2 Channel |
| ST269523 |
Wideband Lamda Sensor & 0-5v Interface, 8 Channel |
Pulse / Frequency Sensors (Digital Input)
| ST492 |
Pulse Amplifier (e.g. Gearbox Sensor Amplifier) |
| ST493 |
RPM Coil Connection Interface for MFD/MFR/MF |
| ST670 |
Proximity Speed Sensor (e.g. Wheelspeed) |
| ST269510 |
Engine RPM Sensor |
| ST269511 |
Driveshaft RPM Sensor Kit, 1.875" (47.6mm), Standard Ford 9" |
| ST269512 |
Driveshaft RPM Sensor Kit, 2.187" (55.5mm), Large Ford 9" |
| ST269513 |
Driveshaft RPM Sensor Kit, Universal |
| ST269514 |
Input Shaft RPM Sensor, Lenco Transmission |
| ST269515 |
RPM Sensor, Magnetic, 5/16"-24 x 1.5 |
| ST269532 |
RPM Sensor, Magnetic, 3/8"-24 x 1.5 |
| ST269533 |
RPM Sensor, Magnetic, 3/8"-24 x 0.620 |
| ST269589 |
GPS Ground Speed Module & Antenna, 10Hz, Pulse Output |
Displacement Sensors, (0-5V), Analogue
| ST270072 |
Linear Potentiometer, Club, 50mm/2" (e.g. Suspension) |
| ST270073 |
Linear Potentiometer, Club, 100mm/4" (e.g. Suspension) |
| ST270077 |
Linear Potentiometer, Club, 150mm/6" (e.g. Suspension) |
| ST270074 |
Linear Potentiometer, Club, 200mm/8" (e.g. Suspension) |
| ST972 |
Linear Potentiometer, Professional, 50mm/2" (e.g. Suspension) |
| ST973 |
Linear Potentiometer, Professional, 100mm/4" (e.g. Suspension) |
| ST977 |
Linear Potentiometer, Professional, 150mm/6" (e.g. Suspension) |
| ST974 |
Linear Potentiometer, Professional, 200mm/8" (e.g. Suspension) |
| ST976 |
String Potentiometer, 300mm/12" (0-5V output) |
| ST978 |
Rotary Potentiometer 360Deg (e.g.Steering) |
| ST979 |
RPM Sensor, Magnetic, 3/8"-24 x 0.620 |
| ST269589 |
Rotary Potentiometer Sensor 120Deg (e.g. pedal angle) |
|
Frequently Asked Questions |
Further information can be found in our Troubleshooting Knowledgebase section.
Your Stack dealer will be happy to assist you further. |
This page last revised
|
|
|
Home > Motorsport > Products
