|
Stack display systems combine both an analogue tachometer dial with an integrated digital LCD display. The Stack stepper motor technology provides accurate dial movement and Independent aerospace industry studies confirm that an analogue needle is the best solution for displaying fast changing information such as engine speed.
The Backlit LCD uses the latest Transflective technology for guaranteed visibility in both bright sunlight and complete darkness.
Stack Configurable Display Systems are designed for users with a non-standard display requirement. The system monitors up to 9 parameters, 7 of which are user configurable and can work with a wide combination of sensors.
| Key Features |
- 7 configurable sensor channels plus engine RPM, battery voltage and lap timing
- Fully configurable LCD display layers; showing up to 6 parameters per layer
- Fully configurable alarms alert driver by display messages and/or warning LEDs
- Fully upgradable to 64+ channel Enginnering Systems (ST8900)
|
Configurable Dash Display System
ST8900
The ST8900 display is designed specifically for use with Stack's Engineering System's range of data loggers. The unit displays and is supplied with 8 inputs as standard. Additionally, the ST8900 systems can also display information from any of the inputs on the Engineering System, up to a maximum of 64 channels.
The ST8900 Dash Displays can be configured to work with a wide range of sensors, allowing the system to be set up to suit most engine and driver monitoring requirements.
The Configurable Dash Display systems are supplied complete with harness and DataPro Configuration software.
Configurable Dash Display System and Recorder System
ST8800
The ST8800 display is available as a 9 channel configurable display system, which can be upgraded to 17 channels by adding an optional ST8891 Expansion Module. The system can also be field upgraded to full 8 or 16 channel data logging specification with recording undertaken inside the display unit by simply making a telephone call and without requiring the removal of the dash from the vehicle. These display systems can not be used where a larger 'R' Recorder Module is already present. The Integrated Recorder has the following capacity: 20channels, 0.5Mbytes, 50Hz.
The ST8800 Dash Displays can be configured to work with a wide range of sensors, allowing the system to be set up to suit most engine and driver monitoring requirements.
The Configurable Dash Display systems are supplied complete with harness and DataPro Configuration software.
Configurable Driver Display
LCD Display Only
ST625
The ST625 LCD Display has been designed for presenting driver information in as clear and precise way possible.
The latest Backlit Transflective display technology guarantees a highly visible display in all environments from complete darkness to full bright sunlight.
The large 8mm high character, 2x20 display is used for displaying the required parameters. During alarm conditions the whole display is used to present the warning message and associated alarm value.
Simple operation controls allow the display to be scrolled through 6 display layers, with each layer having either 2, 4, or 6 parameters.
|
.gif){kind=spacer}