Pro-CAN Gauges

Intelligent gauge system on CANbus network...

Stack’s Pro-CAN Networked Gauge System utilises CAN technology to connect and control gauges - reducing wiring and simplifying installation!

• Single 4-wire cable runs from engine bay through firewall to dash panel.
  
• Sensor interface module supports up to 10 inputs and gauges - with further expansion available.
  
• Programmable maximum and minimum full-dial alarm warnings.
  
• Peak “tell-tale” memory - maximum temperatures, minimum pressures, volts.
  
• Daisy-chain up to 10 gauges in one dash panel.
  
• Supports multiple sets of gauges on remote relay panel(s).
  
• Up to 25 meters/90 feet between sensors and gauges.
  
• Optional digital LCD display for other parameters eg. lap times.
  
• Optional Sequential Shift Light module
  
• Ideal for motorsport, marine, automotive & industrial applications.
  

Each gauge comes with sensor and "daisy-chain" network harness.

Oil Pressure
Pro-CAN Networked Gauges System
ST3601			ST3602
0 -7 BAR			0-100 PSI
M10x1			1/8NPT

Fuel Pressure (Low)
Pro-CAN Networked Gauges System
ST3603			ST3604
0 -1 BAR			0-15 PSI
M10x1			1/8NPT

Fuel Pressure (High)
Pro-CAN Networked Gauges System
ST3605			ST3606
0 -7 BAR			0-100 PSI
M10x1			1/8NPT

Water Temperature
Pro-CAN Networked Gauges System
ST3607			ST3608
40-120°C			100-260°F
M10x1			1/8NPT

Oil Temperature
Pro-CAN Networked Gauges System
ST3609			ST3610
40-140°C			140-280°F
M10x1			1/8NPT

Boost Pressure
Pro-CAN Networked Gauges System
ST3611			ST3612
-1.0 to +2.0 BAR			30inHg to +30 PSI
T-Fitting			T-Fitting

Exhaust Gas Temperature
Pro-CAN Networked Gauges System
ST3613			ST3614
0-1100°C			0-2000°F

Battery Voltage
Pro-CAN Networked Gauges System
ST3616
8 - 18 V

Where to buy Stack

Frequently Asked Questions

If the information above hasn't solved your problem, more help can be found here in our Auxiliary Gauges FAQ section. Your Stack dealer will be happy to assist you further.

This page last revised