Stack TPMS:
Tyre Pressure Monitoring Systems Troubleshooting Guide
Issue |
Possible Solution |
Action Needed |
Sensor readings incorrect. |
SensorID allocated to wrong corner in interrogator. |
Assign sensor to correct corner. |
Sensor is damaged. |
Send back? |
Atmospheric pressure compensation set to wrong value. |
Set correct pressure or set to 1013 for no compensation. |
Issue |
Possible Solution |
Action Needed |
Low signal strength. |
Antenna mounting position incorrect. |
Refer to manual. |
SMA connector not done up correctly. |
Tighten connectors. |
Issue |
Possible Solution |
Action Needed |
No sensors can be detected. |
Sensors not authorised for use in interrogator. |
Add sensors. |
Sensor Damage. |
Replace sensors. |
Antenna position bad. |
Refer to manual. |
Antenna cables not done up. |
Tighten connectors. |
Manuals
TPMS Lite
Installation Guides
TPMS Lite
TPMS Pro
Software
Please select your Stack TPMS model and click the Download button:
Current versions: |
|
|
|
TPMS Lite
All versions |
v2.1.0 |
approx. 25 MB zipped |
Posted: 13.09.10 |
TPMS Pro
6.40 Firmware or below |
v2.1.0 |
approx. 25 MB zipped |
Posted: 13.09.10 |
TPMS Pro
6.50 Firmware or above |
v3.0.4 |
approx. 25 MB zipped |
Posted: 31.10.11 |
Brochures
TPMS Lite & Pro Overview (inc Specifications)
TPMS Pro Data Sheet
This page last revised
|